Universal Audio Volt 1 User Manual

Problem
Solution
No power
• Make sure Volt is connected to a port that
meets USB 2.0 specifications.
• If bus power is insufficient, connect Volt to
external 5VDC power to compensate for the
underpowered USB port.
• Make sure the power switch is in the ON
position.
Host
indicator
doesn’t light
• Power Volt off and back on.
• Try a different USB port or USB hub.
• Try a different USB cable.
Crackling
audio,
dropouts,
glitches
Increase the buffer size setting in the software
on your computer. When recording, you can use
direct monitoring to record without latency at
higher buffer sizes.
(PC) ASIO
driver not
available in
DAW
Install the Volt hardware driver with the UA
Connect app.
Volt 1 Specifications
For Volt 1 specifications, please

Universal Audio Volt 1 Specifications

General

Audio input	MIdi, 1/4\
Form factor	Desktop
Product color	Gray
LED indicators	Yes
Housing material	Metal
XLR inputs	1
USB version	2.0
Device interface	USB Type-C
Supported sample rates	192 kHz
Audio A/D Converter (ADC)	24-bit/192kHz
Power source	USB