13
Select ºC or ºF (Celsius or Fahrenheit)
Press OPTION/COPY for 3 seconds to enter the option setting mode.
Press OPTION/COPY 3 times (until °F / °C begins flashing)
Press UP or DOWN to toggle between the °F or °C setting.
Wait 15 seconds for normal display to return.
(See Option section for more details)
2
1
3
4
CELSIUS DEFAULT: Since Celsius (°C) is the default mode no action
is required to use the thermostat in this mode.
(°C or °F) It is VERY IMPORTANT that you choose Fahrenheit (°F) before
you begin using the thermostat. If you proceed to program the thermostat
with the default Celsius(°C)and THEN change to the Fahrenheit (°F)
setting; all programs set by the user will be deleted.
Final Size: 5” x 3” / 12.5cm x 7.5cm
To Next Page
Loading...
