Need help?Do you have a question about the Uponor Smatrix Wave PLUS and is the answer not in the manual?
General| Storage Temperature | -20 °C to +60 °C |
|---|---|
| Protection Class | IP30 |
| Product Type | Floor Heating System |
| Type | Smatrix Wave PLUS |
| Connectivity | Wireless |
| Communication | 868 MHz |
| Control | Automatic |
| System Components | Thermostats, Control Unit |
| Thermostat Type | Wireless Thermostat |
| Operating Temperature | 0 °C to 50 °C |
| Dimensions | Varies by component |
| Weight | Varies by component |
| Compatibility | Uponor Smatrix System |
Details Uponor Smatrix Wave/Wave PLUS components including controllers, thermostats, and interfaces.
Explains key system functions like Comfort/ECO modes, Autobalancing, and actuator management.
Outlines the recommended stages for installing the Uponor Smatrix Wave/Wave PLUS system.
Guidelines for positioning the Uponor Smatrix Wave/Wave PLUS controller.
Details on connecting various internal and external components to the controller.
Instructions for connecting the controller to the AC power supply.
Procedure for testing the actuators connected to the controller.
Process for registering the Uponor Smatrix Wave Relay Module M-161 with the controller.
Guidelines for optimal placement of thermostats for accurate room temperature sensing.
Details on connecting optional external sensors to various thermostat models.
Steps for the initial setup of digital thermostats, including software version and time.
Guide to setting control mode, temperature setpoint, and other parameters for digital thermostats.
Procedure for registering thermostats to the Uponor Smatrix Wave/Wave PLUS controller.
Process for registering system devices like interfaces, timers, and relay modules with the controller.
Steps for the initial setup of the timer, including software version and time settings.
Process for registering the Uponor Smatrix Wave Timer with the controller.
Guidelines for selecting an appropriate location for the Uponor Smatrix Wave PLUS Interface.
Step-by-step guide for the initial setup and configuration of the interface.
Procedure for resetting the controller to resolve issues like inaccurate channel registration.
Allows adjusting setpoints and viewing advanced information for each room via the interface.
Configuration options for system-wide settings like ECO setback, autobalance, and room check.
Settings related to switching between heating and cooling modes, including offset and operating modes.
Allows setting, changing, or viewing ECO profile schedules for individual rooms.
Procedure for restoring controller settings from a microSD card backup (Wave PLUS only).
Lists common problems, their probable causes, and solutions for the system after installation.
Troubleshooting guide for alarms and problems specific to digital thermostats (T-166, T-167, T-168).
Troubleshooting guide for alarms and problems specific to analogue thermostats (T-163, T-165).
Lists problems and alarms that can occur with the controller, including LED indications.
To Next Page
