Need help?Do you have a question about the Uponor SmatrixMove and is the answer not in the manual?
General| Temperature Range | 5°C to 30°C |
|---|---|
| Protection Class | IP30 |
| Dimensions | 86x86x25 mm |
| Type | Thermostat |
| Connectivity | Wireless |
| Compatibility | Uponor Smatrix systems |
| Display | LCD |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
Details essential safety measures, warnings, and technical constraints for safe operation.
Guidance on environmentally responsible disposal of the product as WEEE.
Describes system overview, components, and provides a sample installation diagram.
Details the T-166 digital thermostat, its characteristics, and capabilities.
Describes the T-167 digital thermostat with RH sensing for Move PLUS systems.
Explains the T-168 digital thermostat with RH sensing and advanced features.
Details the T-163 analogue thermostat for public installations.
Lists optional accessories available for the Uponor Smatrix system.
Explains the core functions of the Uponor Smatrix Move/Move PLUS for heating and cooling.
Outlines the step-by-step installation process and necessary preparations.
Presents various common installation scenarios and system configurations.
Guidelines for selecting the optimal location and mounting position for the controller.
Details on mounting the wireless antenna for optimal signal for Move PLUS.
Step-by-step instructions for connecting various system components to the controller terminals.
Procedure for safely connecting the controller to the mains power supply.
Guide for connecting thermostats and configuring essential system parameters.
Recommendations for optimal placement, labeling, and battery insertion for thermostats.
Details on connecting external sensors to thermostats for enhanced functionality.
Methods for attaching thermostats to walls using brackets or adhesive strips.
Initial setup steps required for digital thermostats, including time and date setting.
Guides on selecting control modes and adjusting setpoint temperatures for thermostats.
Step-by-step process for registering thermostats wirelessly to the controller.
Procedure for wirelessly registering an outdoor sensor with the controller.
Final checks and setup steps for the Uponor Smatrix Move and Move PLUS systems.
Explains how the controller calculates and regulates supply temperature.
Details the controller's display, startup sequence, and run mode interface.
Details all symbols and characters that can appear on the controller's display.
Explains startup sequence and how to navigate operating modes in run mode.
Configures installation type (heating/cooling) and the heating curve.
Sets maximum and minimum supply temperature limitations for heating mode.
Configures cooling curve and sets maximum/minimum supply temperatures for cooling.
Selects the type of hydraulic installation used in the system.
Selects thermostat type and configures wired thermostat connections.
Sets up boost function to improve system response based on temperature difference.
Guides on registering and configuring the first wireless thermostat.
Guides on registering and configuring a second wireless thermostat.
Adjusts supply temperature based on room setpoint and current temperature.
Selects function for wired input 1 (terminal block In1).
Selects function for wired input 2 (terminal block In2).
Selects if an outdoor temperature sensor is used and how it's connected.
Sets a fixed outdoor temperature when no sensor is available.
Selects the temperature display unit (Celsius or Fahrenheit).
Activates or deactivates the valve and pump exercise function.
Allows manual override and control of the actuator.
Activates a preheating program to protect new underfloor heating systems.
Activates a drying program to prevent damage in underfloor heating systems.
Resets all controller parameters to default values, including registration data.
Procedure to exit the system parameter settings menu.
Diagram and description of the physical parts of the analogue T-163 thermostat.
Instructions for changing temperature setpoint and replacing batteries.
Illustrates the physical components and display elements of digital thermostats.
Details the function of each button on the digital thermostats for operation.
Describes the initial power-up sequence and time/date setting for T-168.
Instructions for adjusting temperature setpoint and understanding run mode.
Instructions for adjusting the temperature setpoint using the thermostat's buttons.
Explains the normal operating state of the thermostat and its display.
Describes control modes (RT, RFT, RS, RO) and how to change them.
Guide to navigating and configuring various thermostat settings.
Procedure for setting the time and date on the T-168 thermostat for scheduling.
Instructions for replacing batteries and performing a factory reset.
Guidance on manual, automatic preventive, and corrective maintenance procedures.
Common issues encountered after installation and their potential solutions.
Identifies alarms and problems specific to digital thermostats and provides solutions.
Lists alarms and problems related to analogue thermostats and the controller.
Information on contacting installers and diagnosing system issues.
General technical specifications and compliance information for the system.
Detailed technical specifications for cables, lengths, and wire gauges.
Diagram showing the controller's terminal blocks and their functions.
Schematic diagram illustrating the electrical connections for the controller and its components.
Provides resistance values for sensors at different temperatures and specifications.
To Next Page
