Need help?Do you have a question about the Uponor T-35 and is the answer not in the manual?
General| Voltage | 24 VAC |
|---|---|
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20 °C to +70 °C |
| Humidity | 95% RH (non-condensing) |
| Setpoint Range | 5 °C to +35 °C |
| Accuracy | ±0.5 °C |
| Temperature Range | 5 °C to +35 °C |
| Sensor Type | NTC thermistor |
Lists general precautions to follow during installation and operation of Uponor equipment.
Provides the wiring diagram for the Uponor Controller, detailing connections for components.
Explains the auto-linking function and the restrictions for correct controller operation.
Details how to connect actuators to the system, ensuring auto-linking conditions are met.
Instructions for connecting different Uponor thermostats to the control system and controller.
Steps for connecting the Uponor Timer I-36 to the controller, specifying connector positions.
To Next Page
