Need help?Do you have a question about the Uponor C-35 and is the answer not in the manual?
General| Application | Heating and cooling systems |
|---|---|
| Ambient Temperature | 0°C to 50°C |
| Protection Class | IP20 |
| Housing Material | Plastic |
| Power Supply | 24 VAC |
| Output | Relay |
| Control Range | 5°C to 40°C |
| Accuracy | ±0.5°C |
| Type | Temperature Controller |
Lists essential measures for safe installation and operation of Uponor equipment.
Details the power requirements (50 Hz, 230 V AC) and emergency procedures.
Advises keeping cables away from power cables to avoid interference.
Provides the wiring diagram for the Uponor Controller, detailing channel usage and relays.
Explains the auto-linking function for thermostats and actuators.
Details the process and conditions for connecting Uponor actuators.
Guides on connecting thermostats, including specific models and sensor connections.
Explains how to adjust the room temperature setpoint using the dial.
Explains the function of the OK, plus, and minus buttons for operation.
Lists and describes the various menu options available on the devices.
Step-by-step instructions for setting the clock parameters on the devices.
Explains how to enable the auto-balancing function for efficient loop distribution.
Lists technical specifications for the Uponor Controller, including CE marking and power.
Lists technical specifications for thermostats and timers, covering power, temp, and consumption.
To Next Page
