EasyManua.ls Logo

Uponor c56

Uponor c56
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
01 | 2009
INDOOR CLIMATE
UPONOR
CONTROL SYSTEM
Uponor Control System –
Installation and Operation
Manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Uponor c56 and is the answer not in the manual?

Uponor c56 Specifications

General IconGeneral
BrandUponor
Modelc56
CategoryTemperature Controller
LanguageEnglish

Summary

Quick Start Guide

Install Antenna

Instructions for connecting the antenna to the controller or wall.

Actuator Installation

Guidelines for connecting actuators to controller channels.

Uponor Interface 1-7576 Installation

Connecting the interface using RJ-9 or wire cables.

Register Thermostats

Steps to register thermostats to controller channels.

Preface

Safety Measures

General safety guidelines for installation and operation.

Uponor Control System Overview

Controller C-5556

Description and components of the Uponor Controller C-55/56.

Thermostat Types and Components

Thermostats T-75, T-55, and T-54 Public

Overview of the different Uponor thermostat types.

Interface and Accessories

Interface 1-7576

Overview and components of the Uponor Interface 1-75/76.

Installing the Uponor Control System

Control System Installation Process

Recommended installation process for the control system.

Interface 1-7576 Installation Process

Recommended installation process for the Interface 1-75/76.

Prepare for System Installation

Pre-installation checks and guidelines for the control system.

Install Uponor Controller C-5556

Install Controller Antenna

Instructions for installing the controller antenna.

Attach Controller to Wall

Steps for mounting the controller onto a wall.

Connect Components to Controller

Wiring interface, power, and optional inputs to the controller.

Connect Controller to AC Power

Connecting the controller to the main AC power supply.

Test Actuators

Procedure for testing the functionality of installed actuators.

Install Uponor Thermostats

Register Thermostats to Controller

Process for registering thermostats with the controller.

Install Thermostat T-75

Instructions for attaching the T-75 thermostat to a wall or stand.

Install Thermostats T-54 Public and T-55

Instructions for attaching T-54 Public and T-55 thermostats to a wall.

Test Thermostat Communication

Verifying communication between thermostats and the controller.

Complete Controller Installation

Final steps for completing the controller installation.

Install Uponor Interface 1-7576

Attach Interface to Bracket

Attaching the interface to its mounting bracket.

Wire Interface to Controller C-5556

Connecting the interface to the controller using cables.

Use 15 m Installation Cable

Connecting the interface using a 15m cable.

Optional: Connect Multiple Controllers

Connecting multiple controllers to the interface.

Access Installer Level

How to access the Installer level for advanced settings.

Complete Interface 1-7576 Installation

Final checks and report completion for the interface installation.

Troubleshoot Installation

Reset Controller

Instructions for resetting the controller to clear settings.

Deregister Channels in Controller

Cancelling thermostat registrations from controller channels.

Reset Interface 1-7576

Procedure for resetting the Interface 1-75/76 device.

Operate Controller C-5556

Normal Controller Operation

Description of normal operation and controller LED indicators.

Operate Uponor Thermostats

Operate Thermostat with Display T-75

How to operate and adjust settings on the T-75 thermostat.

Operate Thermostat T-55

How to operate and adjust settings on the T-55 thermostat.

Operate Thermostat T-54 Public

How to operate and adjust settings on the T-54 Public thermostat.

Operate Uponor Interface 1-7576

Identify Alarms

Display System Alarms

Accessing the list of system alarms and their details.

Problems and Recommended Solutions

Related product manuals