Apply ECO profi les
To check the ECO profi le settings, select the days to check by
using and for each day. The assigned timer programme is
displayed.
To apply ECO profi les:
1 On the Uponor screen, select Main Menu > Settings >
Rooms > Apply ECO profi le.
2 Select the desired controller or all
controllers (applies only when more
than one is installed) and press OK.
3 Select the desired room or All and
press OK.
If one ECO profi le is used in most
rooms, apply the profi le to every room
by selecting the setting All.
4 Select the day by using the
and
keys and briefl y pressing the
key
on the desired day. The current profi le
is displayed.
5 Select ECO Profi les mode by pressing the
key.
6 Select the desired ECO profi le and press OK. Repeat the
settings for each day.
9.17 Exercise functionality of valves and pumps
The exercise function maintains the functionality of the valves
and pumps. A 5-minute activation is scheduled each week.
Cancel exercise
To cancel the exercise:
1 On the Uponor screen, select Main Menu > Settings >
System Parameters > Valve/Pump Exercise > Cancel
Exercise.
2 Select Cancel Exercise and press
OK.
Exercise valves and pumps
To run the exercise for both valves and pumps:
1 On the Uponor screen, select Main Menu > Settings >
System Parameters > Valve/Pump Exercise > Exercise
Valve and Pump.
2 Set the time and date for the
5-minute activation and press OK.
Exercise valves only
To run the exercise for valves only:
1 On the Uponor screen, select Main Menu > Settings >
System Parameters > Valve/Pump Exercise > Exercise
Valve Only.
2 Set the time and date for the
5-minute activation and press OK.
9.18 Set display backlight
To set the display backlight:
1 On the Uponor screen, select Main Menu > Settings >
System Parameters > Backlight.
2 Select:
• Always ON
• Dimmed (when inactive) for
reduced screen brightness.
• OFF (when inactive) backlighting is off.
Press OK.
9.19 Display software version
To display the software version of Uponor Interface I-75/76:
1 On the Uponor screen, select Main Menu > Information >
System > Software Version.
X.X.X Software version.
(X.X.X) Hardware version.
41
UPONOR CONTROL SYSTEM – INSTALLATION AND OPERATION MANUAL
UK English
To Next Page
Loading...
Need help?
General
