1-2
Introduction
SL26/30SL Service & Parts
CHASSIS
The chassis is a structural frame that supports all the components of the SL26/30SL work plat-
form.
PURPOSE OF EQUIPMENT
The objective of the work platform is to provide a quickly deployable, self-propelled, variable
height work platform to elevate personnel and materials to overhead work areas.
SPECIAL LIMITATIONS
Travel with the platform raised is limited to a creep speed range.
Elevating of the work platform is limited to firm, level surfaces only. Any degree of slope greater
than 3° will sound a warning alarm when the machine is elevated.
DANGE
R
! !
The elevating function shall ONLY be used when the work platform is level
and on a firm surface. The work platform is NOT intended to be driven over
uneven, rough, or soft terrain when elevated.
To Next Page
Loading...
Need help?
General
