URC Complete Control MX-1400 - Displaying the Setup Menu

8
Complete Control
MX-1400
Owner’s Manual
Table of Contents
Displaying the Setup Menu
The Setup Menu allows users to configure or change certain behaviors of the
MX-1400.
Enter the Setup Menu by pressing and holding the Main and Select (see
image at the right) buttons for greater than three (3) seconds.
Use the up and down navigation buttons to maneuver between the two Setup
pages. To select an option, highlight the desired setting and press the
“Select” key at the center of the navigation keys.
To return to a previous page press the left page button (at the left of Main
Menu). Press the Main or Exit button to return the remote to the Main Menu.
The Setup Menu times out after sixty
(60) seconds and returns the
MX-1400 to the system’s Main Menu.
• Sleep Timers
• Network
• Voice Assistant
• Brightness
• System
• Button Light
• Power
• Date & Time
• Button Beep
• Pickup
• Software Update
• Factory Default
Image on display presents all
the options available on the
two (2) Settings Menu pages.