URC TRC-1480 - Pickup Sensor and Software Update Management

16
Pickup:
Turn on or off the remote’s pickup sensor. When enabled, the TRC-1480 turns on
when the remote is picked up. Select Yes (turn on) or No (turn off).
Enabling the pickup sensor
may reduce the TRC-1480’s
battery life.
Software Update:
URC’s system has the ability to be programmed by a certified URC programmer
remotely (after initial installation). There may be situations where the device may
need to have the software update applied manually.
Select this option only when instructed by your certified URC integrator or URC’s
Technical Support Team.