urmet domus 1067 User Manual

DS1067-062C 80 LBT20063
6) Press and to select the memory position of the telephone number. Press
to confirm.
7) Press to delete the existing number and enter the new telephone number.
Press to confirm and store the new number.
8) Press repeatedly to exit from the menu.
7.3.3 How to delete a telephone number
IMPORTANT! Deleting telephone numbers may not comply with EN50131 and cancel compliance of the entire
burglar alarm system. In particular:
• for EN50131 grade 3 compliance, do not delete the telephone numbers which use the ATS4 external
communicator with IDP numeric protocol.
• for EN50131 grade 2 compliance, do not delete the telephone numbers which use a PSTN line with numeric
protocol
• regardless of EN50131 compliance, the system will not be able to communicate with the outside if all the
telephone numbers are deleted.
Proceed as follows to delete a telephone number:
1) Enter <Master / Installer code>, press
and then .
2) Press
repeatedly until TELEPHONE DIALER appears.
3) Press
.
4) Press
.
5) Press
.
6) Press
and to select the memory position of the telephone number. Press
to confirm.
7) Press to delete the current number and press to confirm.
8) Press
repeatedly to exit from the menu.
UT01:MASTER
SYSTEM STATUS
UT01:MASTER
TELEPHONE DIALER
TELEPHONE DIALER
PHONE NUMBERS
PHONE NUMBERS
TEL. NUMBER
TEL. NUMBER
T01:...

urmet domus 1067 Specifications

General

Brand	urmet domus
Model	1067
Category	Antenna
Language	English