US Robotics USR5670 - Page 9

3
4. Select Search for a suitable driver for my device (Recommended) and click Next.
5. Select CD-ROM drives and click Next.
6. When Windows locates the correct drivers for the PCI Simple Communications Control-
ler, click Next.
If a “Digital Signature Not Found” screen appears, click Yes to continue.
**
7. When Windows is finished installing the drivers, click Finish.
Windows Me
NOTE: If at any time during the installation you are prompted to select the loca-
tion of your installation drivers, select the following location on the Installation
CD-ROM (assuming D: is your CD-ROM drive):
D:\
1. Reconnect your computer and peripherals and turn your computer on.
2. Log into Windows.
3. When the Add New Hardware Wizard appears, insert the Installation CD-ROM into your
CD-ROM drive.
4. Install the U.S. Robotics V.92 PCI Faxmodem Enumerator as follows:
A. Select Automatic search for a better driver (Recommended) and click Next.
B. When the wizard is finished installing the drivers, click Finish.
The wizard then begins a search for drivers for the U.S. Robotics V.92 PCI Faxmodem.
5. Install the U.S. Robotics V.92 PCI Faxmodem as follows.
A. Verify that Automatic search for a better driver (Recommended) is selected and
click Next.
B. When Windows is finished installing the drivers, click Finish.
Windows 98
NOTE: If at any time during the installation you are prompted to select the loca-
tion of your installation drivers, select the following location on the Installation
CD-ROM (assuming D: is your CD-ROM drive):
D:\
1. Reconnect your computer and peripherals and turn your computer on.
2. Log into Windows.
3. When the Add New Hardware Wizard appears, insert the Installation CD-ROM into your
CD-ROM drive and click Next.
4. Install the U.S. Robotics V.92 PCI Faxmodem Enumerator as follows:
A. Select Search for the best driver for your device (Recommended) and click Next.
B. Select CD-ROM and click Next.
** USRobotics has thoroughly tested in conjunction with the supported hardware and has verified compatibility with Win-
dows XP and 2000.