Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
6-13
4 Checking stored documents and changing their names
Perform the following procedure when you want to verify the name of
stored documents, the size of the original documents or the date and
time they were stored in the synergy print box, or when you want to
print out the first page of those document in order to check them. You
can also use this procedure to change the registered name for the
documents.
1
Press the [Document Management] key. The “Document
Management” screen will be displayed.
2
Touch the “Document printing” key or the “Box Editing” key
under “Synergy Print Box”. The screen to select the synergy
print box will be displayed.
Inch specifications
Select function.
Document Management
End
Shared Data Box Synergy Print Box Form box
Document
reg.
Document
printing
Document
reg.
Document
printing
Form
reg.
Box
Editing
Box
Editing
Box
Editing
25/10/'01 19:20
Metric specifications
Select function.
Document Management
25/10/'01 19:20
End
Shared Data Box Synergy Print Box Form box
Document
registr.
Document
printing
Document
printing
Document
registr.
Form
registr.
Box
Editing
Box
Editing
Box
Editing
3
Either touch the synergy print box that contains the
documents to be printed out, or enter its number using the
keypad. Then touch the “Enter” key. The “Document printing”
screen or the “Box editing” screen, as appropriate, will be
displayed.
Inch specifications
NOTES
• If that box was registered with a password, the password entry
screen will be displayed.
Enter the registered password with the keypad and then touch the
“Enter” key.
Inch specifications