Utax CD 1030 User Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
7-26
2
Touch the “Management Def. Set.” key.
The “Managem. Def. Set.” screen will be displayed.
Inch specifications
Close
Each Mgt.
Total
Management
total
Managem. Total
Default setting
Register/Sett.
Management
Def. Set.
Management
edit
Off
On
Management code menu
Management
Metric specifications
Close
Each Mgt.
Total
Management
total
Managem. Total
Default setting
Register/Sett.
Management
Def. Set.
Management
edit
Off
On
Management code menu
Management
3
Select the default setting that you want to change and then
touch the “Change #” key.
Inch specifications
Close
Change #
ValueSetting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Copy management
Print. Managem.
On
On
Printer error report On
Others Mgt. Reg. (print) On
Copy/Printer output mgt. All
Scanner Managem. On
Metric specifications
Close
Change #
ValueSetting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Copy management
Print. managem.
On
On
Printer error report On
Others mgt. Reg. (print) On
Copy/Printer output mgt. All
Scanner Managem. On
NOTE
Perform the following procedure that corresponds to the desired
setting.
● Copier function management ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF for the copier functions of this machine.
1
Select “Copy management” under the “Setting item” column
on the left side of the touch panel and then touch the
“Change #” key.
The “Copy management” screen will be displayed.
Inch specifications
Close
Change #
ValueSetting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Copy management
Print. Managem.
On
On
Printer error report On
Others Mgt. Reg. (print) On
Copy/Printer output mgt. All
Scanner Managem. On
Metric specifications
Close
Change #
ValueSetting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Copy management
Print. managem.
On
On
Printer error report On
Others mgt. Reg. (print) On
Copy/Printer output mgt. All
Scanner Managem. On
2
To turn copy management ON for the copier functions of this
machine, touch the “On” key.
Inch specifications
CloseBack
Copy management
Default setting - Management code menu - Managem. Def. set.
Copy management can be set up.
Off
On
Metric specifications
CloseBack
Copy management
Default setting - Management code menu - Managem. Def. set.
Copy management can be set up.
Off
On
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 1.
3
Touch the “Close” key.
The touch panel will return to the screen in step 1.

Utax CD 1030 Specifications

General

Brand	Utax
Model	CD 1030
Category	All in One Printer
Language	English