Utax CD 1030 User Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
7-27
● Printer function management ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF for the printer functions of this machine.
NOTE
This setting is only available when the optional Printer Kit or Printer/
Scanner Kit is installed in your copier.
1
Select “Print. Managem.” under the “Setting item” column on
the left side of the touch panel and then touch the “Change #”
key.
The “Print. Managem.” screen will be displayed.
Inch specifications
Close
Change #
ValueSetting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Copy management
Print. Managem.
On
On
Printer error report On
Others Mgt. Reg. (print) On
Copy/Printer output mgt. All
Scanner Managem. On
Metric specifications
Close
Change #
ValueSetting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Copy management
Print. managem.
On
On
Printer error report On
Others mgt. Reg. (print) On
Copy/Printer output mgt. All
Scanner Managem. On
2
To turn copy management ON for the printer functions of this
machine, touch the “On” key.
Inch specifications
CloseBack
Print. Managem.
Default setting - Management code menu - Managem. Def. set.
Printer management can be set up.
Off
On
Metric specifications
CloseBack
Print. managem.
Default setting - Management code menu - Managem. Def. set.
Printer management can be set up.
Off
On
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 1.
3
Touch the “Close” key.
The touch panel will return to the screen in step 1.

Utax CD 1030 Specifications

General

Brand	Utax
Model	CD 1030
Category	All in One Printer
Language	English