Utax CD 1030 User Manual

Section 7 COPIER MANAGEMENT FUNCTIONS
7-29
● Non-standard printer driver printout (Printer)
Perform the following procedure when “On” is selected as the “Printer
function management ON/OFF” setting and you want to want to allow
the use of printer drivers other than those available under copy
management.
NOTE
This setting will only be available when “On” is selected as the “Printer
function management ON/OFF” setting.
1
Select “Others Mgt. Reg. (print)” under the “Setting item”
column on the left side of the touch panel and then touch the
“Change #” key.
The “Others Mgt. Reg. (print)” screen will be displayed.
Inch specifications
Close
Change #
ValueSetting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Copy management
Print. Managem.
On
On
Printer error report On
Others Mgt. Reg. (print) On
Copy/Printer output mgt. All
Scanner Managem. On
Metric specifications
Close
Change #
ValueSetting item
Default setting - Management code menu - Managem. Def. Set.
Managem. Def. Set.
Copy management
Print. managem.
On
On
Printer error report On
Others mgt. Reg. (print) On
Copy/Printer output mgt. All
Scanner Managem. On
2
To allow the use of printer drivers other than those available
under copy management, touch the “On” key.
Inch specifications
CloseBack
Others Mgt. Reg. (print)
Default setting - Management code menu - Managem. Def. set.
Output. of print. is possible for unspecif. ID-code
Off
On
Metric specifications
CloseBack
Others mgt. Reg. (print)
Default setting - Management code menu - Managem. Def. set.
Output. of print. is possible for unspecif. ID-code
Off
On
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 1.
3
Touch the “Close” key.
The touch panel will return to the screen in step 1.

Utax CD 1030 Specifications

General

Brand	Utax
Model	CD 1030
Category	All in One Printer
Language	English