EasyManuals Logo

Utax P-C2160DN User Manual

Utax P-C2160DN
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #127 background imageLoading...
Page #127 background image
4-59
Using the Operation Panel
AppleTalk (AppleTalk setting)
AppleTalk is a communications protocol used primarily on Macintosh
computers and also refers to the Mac OS network functions.
AppleTalk assigns 24-bit network addresses (a 16-bit network section and
an 8-bit node address) that are used to identify devices (computers,
printers, etc.) on the network.
When the power is turned on, a broadcast signal is sent out onto the
network and the addresses and machine names are automatically
assigned. The default setting is On.
1 After entering the administrator ID and password, press or
repeatedly until >AppleTalk appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Press or to select whether AppleTalk is enabled.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
IPSec (IPSec setting)
IPSec (IP Security Protocol) is a security protocol adopted as the
standard by the IETF for authentication and encryption in the third
network layer (IP layer).
It can be used with both IPv4 and IPv6.
1 After entering the administrator ID and password, press or
repeatedly until >IPSec appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Press or to select whether IPSec is enabled.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
LAN Interface (LAN Interface setting)
Specify the settings for the LAN interface to be used. The default setting
is Auto.
1 After entering the administrator ID and password, press or
repeatedly until >LAN Interface appears.
>AppleTalk
? On
Note IPv4 uses 32-bit IP addresses and IPv6 uses 128-bit IP
addresses.
>IPSec
? Off
Note LAN Interface is only displayed when the optional network
interface kit (IB-50) is installed.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Utax P-C2160DN and is the answer not in the manual?

Utax P-C2160DN Specifications

General IconGeneral
ColorYes
Print technologyLaser
Maximum resolution9600 x 600 DPI
Time to first page (black, normal)10.5 s
Time to first page (color, normal)12 s
Print speed (black, normal quality, A4/US Letter)21 ppm
Maximum duty cycle- pages per month
Number of print cartridges-
Paper input typeCassette
Total input capacity250 sheets
Multi-Purpose tray input capacity50 sheets
Paper tray media typesCut sheet
Paper tray media weight60 - 163 g/m²
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Wi-FiNo
Standard interfacesUSB 2.0
Memory slots1
Internal memory512 MB
Processor model465S
Processor familyPowerPC
Processor frequency677 MHz
Compatible memory cardsSD
Maximum internal memory1536 MB
Sound power level (standby)43 dB
Sound pressure level (printing)61.7 dB
CertificationGS/TÜV, CE
Product colorGrey, White
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)1129 W
Power consumption (off)0.1 W
Power consumption (standby)57 W
Power consumption (printing)360 W
Power consumption (PowerSave)6 W
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth523 mm
Width390 mm
Height370 mm
Weight29300 g

Related product manuals