EasyManuals Logo

Utax P-C2160DN User Manual

Utax P-C2160DN
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
Using the Operation Panel
4-70
6 Press [MENU]. The display returns to Ready.
MP Tray Empty (Warning when the MP tray is empty)
Turn this setting to On if you want the error displayed when the MP tray is
configured as the default paper source, and there is no paper in the MP
tray, or turn it to Off not to have the error displayed.
The setting On enables the paper-empty message to display when the MP
tray is empty.
1 Press while >Error Handling > is displayed.
2 Press or repeatedly until >>MP Tray Empty appears.
3 Press [OK]. A blinking question mark (?) appears.
4 Select On or Off using or .
5 Press [OK].
6 Press [MENU]. The display returns to Ready.
Timer (Timer setting)
This specifies timer-related settings such as the automatic form-feed
timeout and the timeout settings for Sleep timer.
The options available in Timer are as follows:
ID (Administrator ID input)
Password (Administrator Password input)
Auto Panel Reset (Auto panel reset settings)
Panel Reset Timer (Setting the panel reset timer)
Low Power Timer (Low Power Mode timer timeout time)
Sleep Timer (Sleep timer timeout time)
Auto Error Clear (Auto error clear setting)
Error Clear Timer (Setting the error clear time)
Form Feed Time Out (Automatic form feed timeout setting)
1 Press while Device Common > is displayed.
2 Press or repeatedly until >Timer > appears.
ID (Administrator ID input)
To use the Timer settings, you must enter an administrator ID. For
information on how to set the administrator ID, refer to Administrator
(Administrator settings) on page 4-95.
1 Press while >Timer > is displayed.
2 The message display shows ID and a blinking cursor (_).
3 Press or to increase or decrease, respectively, the value at the
blinking cursor. Enter the specified ID. Use and to move the
>>MP Tray Empty
? On
>Timer >
ID
_

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Utax P-C2160DN and is the answer not in the manual?

Utax P-C2160DN Specifications

General IconGeneral
ColorYes
Print technologyLaser
Maximum resolution9600 x 600 DPI
Time to first page (black, normal)10.5 s
Time to first page (color, normal)12 s
Print speed (black, normal quality, A4/US Letter)21 ppm
Maximum duty cycle- pages per month
Number of print cartridges-
Paper input typeCassette
Total input capacity250 sheets
Multi-Purpose tray input capacity50 sheets
Paper tray media typesCut sheet
Paper tray media weight60 - 163 g/m²
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 220 g/m²
Wi-FiNo
Standard interfacesUSB 2.0
Memory slots1
Internal memory512 MB
Processor model465S
Processor familyPowerPC
Processor frequency677 MHz
Compatible memory cardsSD
Maximum internal memory1536 MB
Sound power level (standby)43 dB
Sound pressure level (printing)61.7 dB
CertificationGS/TÜV, CE
Product colorGrey, White
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)1129 W
Power consumption (off)0.1 W
Power consumption (standby)57 W
Power consumption (printing)360 W
Power consumption (PowerSave)6 W
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth523 mm
Width390 mm
Height370 mm
Weight29300 g

Related product manuals