Using the Operation Panel 4-77
3 Press or to select whether MAC address filtering is enabled.
4 Press [OK]. The MAC address filtering setting is set and the Basic
menu reappears.
Restart Network (Restarting the optional network interface kit)
After all network related settings have been done, restart the network card
of the device. This is mandatory to make the settings effective.
1 In the Basic menu, press or to select Restart Network.
2 Press [OK]. A confirmation screen appears.
3 Press [Yes] ([Left Select]). The message Restarting...
appears and the network is restarted.
Pressing [No] ([Right Select]) returns to the Basic menu without
restarting the network.
Communication (Select the network interface to use)
Select the interface to be used for network connection.
1 In the Optional Network menu, press or to select
Communication.
2 Press [OK]. The Communication screen appears.
3 Press or to select the desired NIC.
Standard NIC: standard network interface of the printer
Option NIC: optional network interface kit
4 Press [OK]. The NIC is set and the Optional Network menu
reappears.
To Next Page
Loading...
Need help?
General
