Using the Operation Panel 4-13
For more information, please refer to Custom Box on page 4-23, Job
Box on page 4-27 or RAM Disk Setting (Using the RAM disk) on page 4-
85
.
Selecting a Menu
The mode selection menu is hierarchical. Press , , or to display
the desired menu.
•If [
a
] appears in the top-right of the screen, you can use the and
to scroll up and down through the menu options one line at a time,
and the and to move between menu options one page at a time.
•If [
P
] appears in the top-right of the screen, you can use the and
to switch between pages.
To return to the menu one level up, press [Back].
Setting a Menu
Select the desired menu and press [OK]. You can now select options in
the menu. press , , or to select or enter the desired setting and
then press [OK] to confirm your selection.
If you are choosing from a list of settings, an asterisk (*) is displayed to
the left of the currently selected setting.
Canceling Menu Selection
If you press [MENU] when a menu is selected, the message display
returns to Ready to print. or Sleeping..
Note Only when USB memory is installed, USB Memory is
displayed.
To Next Page
Loading...
Need help?
General
