EasyManuals Logo

UTC Fire and Security WIU-4 User Manual

UTC Fire and Security WIU-4
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Product features 3
Product features
The WIU-4 provides the following:
Conversion of multiple Wiegand formats into
supervised F/2F format.
Junction box capabilities with removable connectors
for ease of wiring.
Built-in door strike relay with surge protecting
diodes.
Red LED, green LED, and beeper control outputs.
Supports reader tamper and external tamper inputs.
Self-resetting fuse protection on all power and
signal outputs.
Options for supervised or unsupervised Door DI and
request-to-exit (REX) DI inputs.
Built-in surge protection circuitry for data lines.
Four built-in LEDs to help with installation and
troubleshooting.
Supports Wiegand formats up to 64 bits.
Supports most 8 bit keypad reader output formats.
Note: Do not use the WIU-4 with a 2SRP supervised reader
processor board/microcontroller configuration.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the UTC Fire and Security WIU-4 and is the answer not in the manual?

UTC Fire and Security WIU-4 Specifications

General IconGeneral
BrandUTC Fire and Security
ModelWIU-4
CategoryComputer Hardware
LanguageEnglish