Utilitech 00P9016 - Assembly Step 1: Mounting; Main Mounting Plate Installation; Solar Panel Mounting Plate Installation

5
3. Place the mounting plate into position and secure with
cross screws (BB).
4. Slide the light onto the mounting plate.
To position head: Twist the connections (C).
5. Using the mounting plate of the solar panel (AA) as
template, mark and drill the holes on the mounting
surface in the desired location with a 3/16 in. drill bit
and insert plastic anchors (CC).
.
3
Hardware Used
ST4.2x30 Cross Screw x4
BB
BB
4
5
Hardware Used
Plastic anchors x3
CC
CC