Uwatec HYDROS PRO - TWIN CYLINDER ATTACHMENT; VALVE SYSTEM OPERATION

36 37
TWIN CYLINDER ATTACHMENT
FOR NON-EUROPEAN REGIONS:
The HYDROS PRO is designed to be dived with twin cylinders up to 2 X 10 litre capacity, or
with a combined weight of up to 30kg / 65lbs.
Two stainless steel female bushes with an M8 thread are provided on the outside of the
Tank Plate to allow you to attach twin cylinders.
NOTE:
The HYDROS PRO is not currently CE Certified for Twin Cylinder use.
VALVE SYSTEM
SCUBAPRO BCs are equipped with a Power Inflation Valve that is connected to the cylinder
via the first stage regulator and makes it possible to control buoyancy in the water by inflat-
ing and deflating the BC using inflate and deflate buttons.
As standard, the HYDROS PRO is fitted with our premium Balanced Power Inflator (BPI).
Alternatively, users can fit the AIR2 system which incorporates an Alternate Air Source and
replaces the BPI. The AIR2 oers the same buoyancy control features as the BPI.
Connecting the BPI or AIR 2 allows you to inflate your BC using air from your SCUBA
cylinder. Its LP hose, threaded on a LP Port of the first stage regulator, is connected to the
Power Inflation Valve by the Quick Disconnect Coupling.
BPI AIR2