SCUBAPRO MK 25/MK 20 First Stages
2003 SCUBAPRO
Important note
: The following information is not designed to be a complete training guide for servicing the listed SCUBAPRO regulators. All SCUBAPRO
technicians are required to attend an annual service training program to insure safe handling and servicing of SCUBAPRO products. All SCUBAPRO technicians
must be employed by an authorized SCUBAPRO facility.
11
6mm
For DIN Regulators
Tighten the DIN fitting using a 6mm
hex. Torque to 266 in-lbs/30 N-m.
Hold the first stage using the first stage
handle.
For DIN Regulators
Replace the filter and assemble the
spring, filter and filter retainer in the
DIN fitting.
To Next Page
Loading...
