UWE APM - Specifications

2. SPECIFICATIONS
Model No.
APM INDICATOR
Max.
USER DEFINED
n
max
6000
Tare Range
1/3 Max. – e (NOTE 1)
Power-on Zero Range
±20% Max. (NOTE 1)
Zero Range
±2% Max. (NOTE 1)
Min. Load
20e (NOTE 1)
Max. measuring range
9.0mV
Min. signal voltage per
verification scale interval
0.8 V
Power voltage requirements
6.0 VDC (BY EXTERNAL POWER
ADAPTOR OR RECHARGEABLE
BATTERY)
Minimum battery voltage
5.5 VDC
Load cell Excitation voltage
5 VDC
Minimal load cell impedance
85
Maximal load cell impedance
5000
Load cell connection
4-wire
Operation
Environment
-10
o
~40
o
C
Non-condensed. R.H.≦85%
Specifications subject to change without notice.
NOTE 1:
For Multi range or interval, change e to e
1
.
CAUTION:
To comply with the law of certain countries and certain
approval requirements, the avoirdupois weight unit of
this indicator may be disabled.