7. MC KEY
Press MR and ZERO simultaneously to clear weight from
memory.
8. LO BAT INDICATOR
This indicator appears when input voltage is below the
lowest input limit. Check the power supplied to the
indicator.
9. ZERO INDICATOR
This indicator appears to indicate zero weight status.
10. NET INDICATOR
This indicator appears to indicate the tare function
is in operation and weight shown is net weight.
11. M+ INDICATOR
This indicator appears to indicate memory contains of
stored data.
12. MR INDICATOR
This indicator appears to indicate the value shown is
the total accumulated weight stored.
13. WEIGHT UNIT INDICATOR
The current weight unit is displayed here.
To Next Page
Loading...
