NOTE 2:
When under OIML mode, for Multi range or interval, change
e to e
1
. When under non-OIML mode, the default setting
is full tare range.
NOTE 3:
The power-on zero (initial zero) range can be selected
with ±2%, ±5%, ±10%, ±15%, ±20%, ±30%, ±40% at F3
function followed CAP1.? setting.
When under OIML mode, the default setting is ±10%.
NOTE 4:
For Multi range or interval, change e to e
1
.
To Next Page
Loading...
