UWE OAC Series User Manual

OAC/OEC/OVC SERIES
DIGITAL COUNTING AND CHECKING SCALE
OPERATION MANUAL
PLEASE READ THIS MANUAL VERY CAREFULLY BEFORE
ATTEMPT TO OPERATE THE SCALE
AUGUST 1999
Specifications subject to change without prior notice
CONTENTS
1. INSTALLATION
2. SPECIFICATIONS
3. KEYBOARD, PANEL LAYOUT AND DESCRIPTION
4. INTERNAL SETTINGS
5. INSTRUCTION FOR USE
6. TROUBLE SHOOTING
7. DAILY CARE AND MAINTENANCE
This document hosted by: www.oldwillknottscales.com

UWE OAC Series Specifications

General

Brand	UWE
Model	OAC Series
Category	Scales
Language	English

Summary

INSTALLATION

Scale Power Connection and Charging

Guide on connecting the power adaptor and initial charging requirements.

SPECIFICATIONS

General Scale Specifications

Details of scale capacity, division, operation environment, and power source.

Minimum Requirements for Counting

Table outlining minimum requirements for accurate piece counting.

INTERNAL SETTINGS

Scale Placement Guidelines

INSTRUCTIONS FOR USE

Zeroing the Scale When Unloaded

Container Weight Entry and Clearing

Steps for taring the weight of a container and clearing it from memory.

General Weighing Operations

Counting with Known Unit Piece Weight

How to count items when the unit piece weight is known and fixed.

Counting with Unknown Unit Piece Weight

Steps for counting items when the unit piece weight must be determined via sampling.

Sampling Procedure for Unit Piece Weight

Detailed procedure for determining unit piece weight through sampling.

AUTO Piece Weight Enhancement Function

Using Check Functions

Unit Piece Weight PLU Memory Management

Managing unit piece weights in PLU (Price Look-Up) memory slots, including saving, recalling, and clearing.

Scale Battery Recharging

Guidance on when and how to recharge the scale's battery, indicated by LO-BAT.

TROUBLE SHOOTING

Scale Power On Issues

Solutions for issues where the scale fails to power on.

Automatic Power Off and Low Battery

Addresses problems related to the AUTO POWER OFF function and low battery indicators.

Capacity Not Reached Issues

Display Panel Blank on Power On

Blank Panels During Operation

Inaccurate Weighing Results

Steps to diagnose and correct inaccurate weighing results due to placement or environmental factors.