UWE SAC Series - User Manual

SAC SERIES
TRIPLE-INTERVAL HIGH PRECISION
COUNTING SCALE
OPERATION MANUAL
PLEASE READ THIS MANUAL VERY CAREFULLY BEFORE ATTEMPT
TO OPERATE THE SCALE
December 2001
Specifications subject to change without prior notice
CONTENTS
1. INSTALLATION
2. SPECIFICATIONS
3. KEYBOARDS, PANEL LAYOUT AND DESCRIPTION
4. SCALE SETUP
5. INSTRUCTION FOR USE
6. TROUBLESHOOTING
7. ERROR CODES AND DESCRIPTIONS
8. DAILY CARE AND MAINTENANCE

Summary

Installation Guide

Accessory Check

Powering On and Charging

Steps to turn on the scale and perform the initial charging process.

Scale Specifications

General Specifications

Details on weighing capacity, platter size, power source, and operating environment.

Minimum Piece and Sample Weights

Recommended minimum piece weight and sample size for accurate counting.

Keyboards and Panel Description

Key Functions

Explanation of the function of each key on the scale's keypad.

Indicator Functions

Scale Setup and Settings

Scale Placement

Guidance on placing the scale on a stable, level surface away from interference.

Scale Power On;Off

Instructions for Use

Zeroing the Display

How to set the scale display to zero when no load is applied.

Tare Function

Procedures for taring off container weight, including actual and pre-tare methods.

Placing a Load

Weighing Applications

Unit Piece Weight for Counting

Explanation of unit piece weight's importance in counting operations.

Direct Entry of Unit Piece Weight

Sampling Method for Unit Piece Weight

Warning Indicators and Counting Applications

Low Unit Weight Indicator

Low Sample Size Indicator

Counting Application Procedure

Step-by-step guide for performing counting operations.

Unit Piece Weight Memory (PLU) and Data Output

Troubleshooting and Maintenance

Scale Not Turning On

Troubleshooting steps for when the scale fails to power on.

Scale Turned Off Automatically

Resolving issues with the scale shutting off unexpectedly.

Rated Capacity Not Reached

All Display Blank on Power On

Steps to resolve when all displays are blank except ZERO and TARE indicators.

Weight;Count Panels Blank During Operation

Inaccurate Weighing Results

Steps to take when the scale provides inaccurate weighing results.

Error Codes and Descriptions

Explanation of error codes (Err_1 to Err_5) and their meanings.

Daily Care and Maintenance

Guidelines for cleaning, maintaining, and storing the scale.

UWE SAC Series Specifications

General

Brand	UWE
Model	SAC Series
Category	Scales
Language	English