EasyManua.ls Logo

V-TEK DT607C-S1 - Appendix

V-TEK DT607C-S1
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-13-
Precautions
Specification
Please clean the unit with soft cotton cloth, don't use the organic impregnant or chemical
clean agent. If necessary, please use a little pure water or dilute soap water to clean the dust
The unit is weather resistant. However do not spray high pressure water onto door station
directly. Excessive moisture may cause problems
You must use only original Intelligent Power supply which is supplied or approved by the
manufacturer
Pay attention to the high voltage inside the products, please refer service only to a trained
and qualied professional
APPENDIX
Power supply: DC 24V
Power consumption: Standby 0.8W; Working 3W
Camera lens: Color CMOS, 520TVL
1/4’ camera,105
0
angle of view
Lock Power supply: 12Vdc, 280mA(Internal Power);
Number of relay circuits: 2 (second lock need external power supply)
Mounting: Surface mount
Working temperature: -20ºC ~ +55ºC
Protection: IP54
Material: Zinc alloy
Wiring: 2 wires, no-polarity
Dimension: H176×W90×D24mm