Why do «0.00» and «AUTO» flash on my V-ZUG Combair S display?
If you see «0.00» and «AUTO» flashing alternately on the digital display of your V-ZUG Oven, it indicates that the time hasn't been set. You should set the time to resolve this.
General| Oven size | Medium |
|---|---|
| Oven type | Electric |
| Cleaning type | Catalytic |
| Self-cleaning | Yes |
| Number of ovens | 1 |
| Total oven power | - W |
| Microwave cooking | - |
| Total oven(s) interior capacity | 52 L |
| Current | 10 A |
| Connected load | 3800 W |
| AC input voltage | 400 V |
| AC input frequency | 50 Hz |
| Energy efficiency index (EEI) | 102.6 |
| Energy consumption (conventional) | 0.78 kWh |
| Energy consumption (forced convection) | 0.84 kWh |
| Door hinge | down |
| Control type | Rotary |
| Product color | Black |
| Control position | Front |
| Appliance placement | Built-in |
| Lamp type | Halogen |
| Lamps quantity | 2 lamp(s) |
| Clock type | Electronic |
| Timer type | Digital |
Weight and Dimensions| Depth | 569 mm |
|---|---|
| Width | 548 mm |
| Height | 759 mm |
| Weight | 45000 g |
| Depth with door open | 440 mm |
| Installation compartment depth | 605 mm |
| Installation compartment width | 550 mm |
| Installation compartment height | 762 mm |
To Next Page