6
vacon • 98 Control Keypad
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
6.3.8.1 Selection of language
The VACON
®
NX control keypad offers you the possibility to control the inverter through the keypad
in the language of your choice.
Locate the language selection page under the System menu. It‘s location indication is S6.1. Press
Menu button right once to enter the edit mode. As the name of the language starts to blink you can
select another language for the keypad texts. Confirm with the Enter button. The blinking stops and
all text information on the keypad are presented in the selected language.
T6.8.2.3 PwOn Day Counter
T6.8.2.4 PwOn Hour Count.
T6.8.2.5 Clr Optime cntr
Not Reset
Reset
S6.8.3 Software
I6.8.3.1 Software package
I6.8.3.2 SystemSw version
I6.8.3.3 Firmware interf.
I6.8.3.4 System load
S3.8.4 Applications
S6.8.5 Hardware
S6.8.5.1 Power unit
S6.8.5.2 Unit Voltage
S6.8.5.3 Brake Chopper
S6.8.5.4 Brake Resistor
S6.8.5.5 Serial number
S6.8.6 Expander boards
A:
B:
C:
D:
E:
S6.8.7 Debug
I6.8.7.1 System Load
I6.8.7.2 Parameter Log
S6.9 Power Monitor
IU filtered
IV filtered
IW filtered
S6.11 Power multimon.
Table 36. System menu functions
Code Function Min Max Unit Default Selections
To Next Page
Loading...
Need help?
General
