Control Keypad vacon • 83
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
6
6. CONTROL KEYPAD
The control keypad is the link between VACON
®
NX Active Front End and the user. The VACON
®
NX
control keypad features an alphanumeric display with seven indicators for the Run status (RUN,
, READY, STOP, ALARM, FAULT) and three indicators for the control place (I/O term/ Keypad/
BusComm). There are also three Status Indicator LED’s (green – green – red), see Chapter 6.1.2.
The control information, i.e. the menu number, description of the menu or the displayed value and
the numeric information are presented on three text lines.
The VACON
®
NX Active Front End is operable through the nine push-buttons of the control keypad.
Furthermore, the buttons can be used in setting parameters and monitoring values.
The keypad is detachable and isolated from the input line potential.
To Next Page
Loading...
Need help?
General
