Need help?Do you have a question about the Vacon NXP series and is the answer not in the manual?
General| Communication interfaces | RS-485, Ethernet |
|---|---|
| Storage temperature range | -40°C to +70°C |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Product series | NXP |
| Voltage range | 200 V to 690 V |
| Input voltage range | 200 V to 690 V |
| Frequency range | 0 Hz to 500 Hz |
| Control method | Vector control |
| Protection features | Overcurrent, overvoltage, undervoltage, overtemperature, short circuit |
| Enclosure classes | IP21, IP54 |
| Braking chopper | Built-in or external |
| EMC filter | Built-in or external |
| Communication protocols | Modbus, Profibus, CANopen, Ethernet |
| Operating temperature range | -10°C to +50°C |
| Humidity range | 5% to 95% (non-condensing) |
| Cooling method | Air-cooled or liquid-cooled |
Details physical board slot locations on NXS/NXP control boards.
Describes physical board slot locations on NXL control boards.
Categorizes Vacon option boards into types A, B, C, and D.
Provides electrical and environmental specifications for option boards.
Explains coding and slot guides to prevent incorrect board mounting.
Discusses unique identification codes for Vacon option boards.
Explains how to map functions to I/O terminals using the control panel.
Guides on using NCDrive software for function-to-terminal mapping.
Details parameters for configuring option board inputs and outputs.
Specifies cable requirements, tightening torques, and grounding.
Describes the sticker for recording option board installation details.
Details basic I/O boards (OPTA series) used for standard I/O functions.
Presents I/O expander boards (OPTB series) for increasing drive I/O capacity.
Describes adapter boards (OPTD series) for connecting to communication buses.
To Next Page
