Need help?Do you have a question about the Vacon 100 flow and is the answer not in the manual?
General| Protection class | IP20 |
|---|---|
| Communication interface | RS-485 |
| Operating temperature | -10°C to +50°C |
| Storage temperature | -40°C to +70°C |
| Ambient temperature | -10°C to +40°C |
| Control method | Sensorless vector control |
| Communication protocols | CANopen |
| Approvals | CE, UL |
| I/O | 2 analog inputs |
| Protection features | Overcurrent, overvoltage, undervoltage, overtemperature |
| Frequency range | 0 Hz to 400 Hz |
| Humidity | 5% to 95%, non-condensing |
| Voltage range | 208-240 V |
Describes severe risks associated with live components and high voltage.
Lists important warnings regarding installation, measurements, spare parts, and motor starting.
Details earthing requirements and protective conductor specifications for safety.
Configuration of network settings like IP address mode, subnet mask, and gateway.
Details on specific EtherNet/IP parameters such as protocol, instances, and timeouts.
Guides on setting up fieldbus control and basic reference selection for the drive.
To Next Page
