Vacon 100 flow - Control Supervisor Object, Class 0 X29

Common Industrial Objects implemented by vacon® 100 family vacon • 43
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
7
Instance Attribute “PoleCount”
This attribute allows reading and writing of the number of poles in the motor. The unit of the
attribute is 1.
Instance Attribute “Base Speed”
This attribute allows reading and writing of the nominal speed at rated frequency. The unit of the
attribute is 1 RPM
7.2.3 Control Supervisor Object, Class 0x29
Control Supervisor Object provides an interface for drive management. You can, for example, start
and stop the motor with this object.
Table 30. Control supervisor object
Class name Control supervisor object
Class identifier
41
d
/ 29
h
Class
Attributes
Id Access rule Name Datatype Description
-- - - -
Class Ser-
vices
Id Name Description
1 Get_Attributes_All
Returns content of all (implemented)
attributes in the class.
14
d
0E
h
Get_Attribute_Single Used to read single attribute value.