Vacon 100 flow User Manual

Common Industrial Objects implemented by vacon® 100 family vacon • 41
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
7
7.2 Objects Present in an AC/DC Drive
7.2.1 Assembly Object, Class 0x04
The assembly object groups (or assembles) the attribute values into a single block of data.
7.2.1.1
Instance Attributes
Instance Attribute “Data”
This attribute can be used to get assembly data. The content and length of the data depends on the
configuration of the assembly instance.
7.2.2 Motor Data Object, Class 0x28
Motor Data Object provides interface to the motor data attributes, for example “motor type”.
Table 28. Assembly object
Class name Assembly object
Class identifier 4
Class
Attributes
Id Access rule Name Datatype Description
1 Get Revision UINT Class revision (2)
2GetMax InstanceUINT
Maximum instance num-
ber (137
h
)
3Get
Number of
Instances
UINT
Number of object
instances(17)
Class Ser-
vices
Id Name Description
1 Get_Attributes_All
Returns content of all (implemented)
attributes in the class.
14
d
0E
h
Get_Attribute_Single Used to read single attribute value.
Instance
Attributes
Id Access rule Name Datatype Description
3Set Data
ARRAY of
BYTE
Assembly data
Instance
Services
Id Name Description
14
d
0E
h
Get_Attribute_Single Used to read single attribute value
16
d
10
h
Set_Attribute_Single Used to write a single attribute value
Table 29. Motor data object
Class name Motor data object
Class identifier
40
d
/ 28
h

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V