7
vacon • 28 Common Industrial Objects implemented by vacon® 100 family
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
Instance Attribute “Product Name”
This attribute contains human readable name identification for this instance. The value returned is
“VACON® 100”.
7.1.1.2
Services
Instance Service “Reset”
The VACON® 100 Family AC drives support only reset type 0.
The reset type 0 means that the device represented by the Identity Object will as closely as possible
emulate the cycling of power.
If an error is detected, an error response is returned. Otherwise a successful Reset response is
returned.
7.1.2 Message Router Object, Class 0x02
The Message Router Object is mandatory in all CIP devices. It provides a messaging connection
point through which a Client may address a service to any object class or instance in a target device.
Although the object is mandatory, there are no mandatory attributes or services.
The VACON® 100 Family AC drives do not currently implement any of the object’s services or
attributes
7.1.3 Connection Manager Object, Class 0x06
The communication characteristics between the applications in different devices are modelled
using Connection Objects. The entities (devices) involved in a connection are referred to as end-
points. A Connection Manager is required in some CIP networks to control the aspects of Connection
object instances.
The Connection Manager class allocates and manages the internal resources associated with both
I/O and Explicit Messaging connections.
Table 13. Message router object
Class name Message Router Object
Class identifier 2
Class
Attributes
Id Access rule Name Datatype Description
-----
Class Ser-
vices
Id Name Description
-- -
Instance
Attributes
Id Access rule Name Datatype Description
-----
Instance
Services
Id Name Description
-- -
To Next Page
Loading...
Need help?
General
