Vacon NXP series User Manual

1
vacon • 4 General information
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
1.3 Option board types
The VACON
®
option boards are divided in four groups according to their characteristics: types A, B,
C and D. Short descriptions of the types below:
OPTA_
• Basic boards used for basic I/O (NXS, NXP); normally pre-installed at the factory.
• This board type uses slots A, B or C.
See pages 17 to 49 for a detailed presentation of the boards of this type. See also the principle
diagram on the options boards and their equipment on page 81.
OPTB_
• Option boards used for I/O expansion.
• Normally pluggable into slots B, C, D and E.
See pages 53 to 64 for a detailed presentation of the boards of this type. See also the principle
diagram on the options boards and their equipment on page 81.
OPTC_
• Fieldbus boards (e.g. Profibus or Modbus).
• These boards are connected to slots D and E.
See a separate manual on each individual Fieldbus Board. Ask factory or your nearest distributor
for more information.
OPTD_
• Adapter boards
• Boards with fiber optic adapters, e.g. System Bus Fiber Optic Adapter Board.
• Connect the adapter boards to slots D and E (see however page 77).
See pages 69 to 79 for a detailed presentation of the boards of this type. See also the principle
diagram on the option boards and their equipment on page 81.

Vacon NXP series Specifications

General

Communication interfaces	RS-485, Ethernet
Storage temperature range	-40°C to +70°C
Dimensions	Varies by model
Weight	Varies by model
Product series	NXP
Voltage range	200 V to 690 V
Input voltage range	200 V to 690 V
Frequency range	0 Hz to 500 Hz
Control method	Vector control
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature, short circuit
Enclosure classes	IP21, IP54
Braking chopper	Built-in or external
EMC filter	Built-in or external
Communication protocols	Modbus, Profibus, CANopen, Ethernet
Operating temperature range	-10°C to +50°C
Humidity range	5% to 95% (non-condensing)
Cooling method	Air-cooled or liquid-cooled