Need help?Do you have a question about the Vacon 20 SERIES and is the answer not in the manual?
General| Output Voltage | 0 to Input Voltage |
|---|---|
| Storage Temperature | -40°C to +70°C |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Power Range | 0.25 kW to 18.5 kW |
| Voltage Range | 200 V to 480 V |
| Control Method | Sensorless vector control |
| Protection Class | IP20 |
| Ambient Temperature | -10°C to +50°C |
| Communication Options | Modbus, CANopen |
| EMC Filter | Integrated |
| STO (Safe Torque Off) | Yes |
| Input Voltage | 208-240 V, 380-480 V |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Overtemperature |
| Operating Temperature | -10°C to +50°C |
| Humidity | 5% to 95% non-condensing |
Details specific functions and access levels of the Vacon BH application.
Explains the status of the ASi board and potential fault conditions.
Details power and control terminals for MU2 with AS-interface.
Details power and control terminals for MU2 with Profibus.
Explains monitoring of parameters, signals, statuses, measurements, and lists ASI, sensors, and motor items.
Lists drive monitoring items like voltage, temperature, frequency, and I/Os.
Introduces parameter groups and explains column explanations for parameter tables.
Details parameters for motor settings, including voltage, frequency, speed, and current.
Covers parameters for start/stop logic, run control, start function, and stop function.
Describes parameters for frequency references, including min/max, selection, and presets.
Details parameters for acceleration and deceleration times, ramp shapes, and quick stop deceleration.
Lists parameters for input functions like start signals, preset speed selection, and fault reset.
Covers parameters for ASi inputs and relay outputs, including functions and delays.
Describes parameters for mechanical brake control, including open/close frequency and delay.
Covers parameters for supervisions like speed tolerance, frequency, and current limits.
Explains parameters for motor control, including field weakening, U/f selection, and brake chopper.
Describes parameters related to motor settings like nominal voltage, frequency, speed, and current.
Explains parameters for start/stop logic, auto run control, start function, and stop function.
Details parameters for frequency references, including min/max, auto selection, and potentiometer control.
Describes parameters for acceleration and deceleration times, ramp shapes, and S-shaped ramps.
Lists parameters for input functions like start signals, preset speed selection, fault reset, and force brake.
Details parameters for ASi inputs and relay outputs, including signal selection and delays.
Describes parameters for mechanical brake control, including open frequency, current, and closing delay.
Covers parameters for supervisions like running feedback tolerance, frequency, and current limits.
Explains parameters for motor control, including field weakening, U/f selection, and voltage settings.
Details parameters for motor protections like earth fault, stall, underload, and thermal faults.
Covers parameters for automatic reset functions, including wait time, trial time, and restart function.
Details parameters for non-ASi fieldbus data output selection and ASi outputs emulation.
Explains Modbus data input mapping, registers, names, descriptions, and ranges.
Describes Modbus data output mapping, registers, names, descriptions, and ranges.
Covers parameters for analogue output function, minimum signal, scaling, and filter time.
Details parameters for user interface, including access level and parameter lock.
To Next Page
