Vacon 20 SERIES User Manual

Parameter description vacon • 44
Service support: find your nearest Vacon service center at www.vacon.com
3
3.6 Output functions
P6.1 ASI INPUT 1
P6.2 AS
I INPUT 2
P6.3 AS
I INPUT 3
P6.4 AS
I INPUT 4
Meaning of ASi input bit.
0: not used
1: Sensor 1
2: Sensor 2
3: Sensor 3
4: Sensor 4
5: Ready + Automatic (both conditions are needed to have the bit high)
6: Run
7: Fault
8: Fault or warning
9: Reverse
10: Running feedback
1)
11: Automatic mode
12: At speed (reference reached, from internal motor control)
13: Output freq superv
14: Output current superv
15: Brake command
16: Quick stop active
1)
when Automatic mode is not assigned to a specific Input, Running Feedback input includes
also information about Automatic.
Automatic Run Output frequency <= Setpoint Feedback
0- - 0
10 - 1
11 0 0
11 1 1

Vacon 20 SERIES Specifications

General

Output Voltage	0 to Input Voltage
Storage Temperature	-40°C to +70°C
Dimensions	Varies by model
Weight	Varies by model
Power Range	0.25 kW to 18.5 kW
Voltage Range	200 V to 480 V
Control Method	Sensorless vector control
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Communication Options	Modbus, CANopen
EMC Filter	Integrated
STO (Safe Torque Off)	Yes
Input Voltage	208-240 V, 380-480 V
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overtemperature
Operating Temperature	-10°C to +50°C
Humidity	5% to 95% non-condensing