Vacon NXA series User Manual

Control Keypad vacon • 105
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
6
Figure 73. Timeout time setting
NOTE! If the Default page value is 0 the Timeout time setting has no effect.
Contrast adjustment (P6.6.4)
In case the display is unclear, you can adjust it‘s contrast through the same procedure as for the
timeout time setting, see Timeout time (P6.6.3).
Backlight time (P6.6.5)
By giving a value for the Backlight time, you can determine how long the backlight stays on before
going out. You can select any time between 1 and 65535 minutes or 'Forever'. For the value setting
procedure, see Timeout time (P6.6.3).
90 s
READY
READY READY
90 s.
enter
60 s.
Tim eout tim e
Timeout time T imeout tim e
CANCEL
CONFIRM CHANG
E
11196.emf

Vacon NXA series Specifications

General

Brand	Vacon
Model	NXA series
Category	Controller
Language	English