Vacon NXP series - Page 270

335 ACTUAL VALUE 2 SELECTION 57 (2.2.10, 2.2.1.10)
Table 129: Selections forparameter IDs 334 and 335
Selection
number
Selection name Description
0 Not used
1 AI1
2 AI2
3 AI3
4 AI4
5
Fieldbus (Actualvalue 1: FBProcessDataIN2; Actual value 2: FBPro-
cessDataIN3). See Chapter 8.7 Fieldbus control parameters
(IDs 850 to 859).
Application 5
6 Motor torque
7 Motor speed
8 Motor current
9 Motor power
10
Encoder frequency (for Actual
value 1 only)
336 ACTUAL VALUE 1 MINIMUM SCALE 57 (2.2.11, 2.2.1.11)
Sets the minimum scaling point for Actual value 1. See Fig. 46 Examples of actual value signal
scaling.
337 ACTUAL VALUE 1 MAXIMUM SCALE 57 (2.2.12, 2.2.1.12)
Sets the maximum scaling point for Actual value 1. See Fig. 46 Examples of actual value signal
scaling.
338 ACTUAL VALUE 2 MINIMUM SCALE 57 (2.2.13, 2.2.1.13)
Sets the minimum scaling point for Actual value 2. See Chapter 339 Actual value 2 maximum
scale 57 (2.2.14, 2.2.1.14).
339 ACTUAL VALUE 2 MAXIMUM SCALE 57 (2.2.14, 2.2.1.14)
Sets the maximum scaling point for Actual value 2. See Fig. 46 Examples of actual value signal
scaling.
VACON · 270 PARAMETER DESCRIPTIONS
8
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205