Need help?Do you have a question about the Vacon OPTAF and is the answer not in the manual?
General| Brand | Vacon |
|---|---|
| Model | OPTAF |
| Category | Controller |
| Language | English |
Describes the physical layout and components of the OPTAF board.
Details the layout and components of the VACON NXP control board VB00761.
Explains the principle and operation of the Safe Torque Off safety function.
Details the principle and operation of the Safe Stop 1 safety function.
Provides technical specifications and parameters for safety functions.
Specifies the activation and de-activation times for safety functions.
Details the input voltage requirements and levels for safety functions.
Explains filtering for external dark test pulses to prevent false indications.
Describes filtering for external light test pulses to prevent false indications.
Details the I/O terminals and connections for the OPTAF board.
Provides safety-related data for STO function per relevant standards.
Details safety-related data for the SS1 safety function.
Illustrates various wiring configurations for safety functions.
Shows wiring for STO without a reset function.
Illustrates STO wiring with reset or EN 60204-1 stop category 0.
Shows STO wiring with an external safety relay module.
Illustrates SS1 or EN 60204-1 stop category 1 wiring with a time-delayed relay.
Guides on how to commission the STO and SS1 safety functions.
Provides general guidelines for wiring the OPTAF board for safety functions.
A checklist to ensure all steps for commissioning safety functions are completed.
Details parameter settings for the STO safety function.
Lists and explains specific parameters for the OPTAF board.
Guides on setting up the drive and external relay for SS1.
Instructions for testing the STO and SS1 safety functions.
How to determine the STO safety level (SIL/PL) of the drive.
Covers maintenance procedures and fault diagnosis for safety functions.
Lists internal variables for monitoring and logging OPTAF board status.
Describes warnings and alarms related to STO/SS1 safety functions.
Details technical specifications for the ATEX thermistor function.
Describes the functionality of the thermistor supervision circuit.
Details the hardware and connection terminals for the thermistor function.
Guides on commissioning the ATEX thermistor function.
General wiring guidelines for the thermistor connection.
Configuration of parameters for the ATEX thermistor function.
Explains short circuit monitoring for the thermistor input.
Describes non-ATEX compliant use of the thermistor function.
Lists and explains OPTAF board parameters related to thermistor function.
Covers maintenance procedures and fault diagnosis for the thermistor function.
Details fault diagnosis for the thermistor function.
To Next Page
