Need help?Do you have a question about the Vacon optbj and is the answer not in the manual?
General| Brand | Vacon |
|---|---|
| Model | optbj |
| Category | Controller |
| Language | English |
Formal statement of product compliance with EU directives and standards.
Certificate confirming product conformity with safety requirements for specific functions.
Certificate confirming product conformity with ATEX directive requirements for explosive atmospheres.
Details and specifications associated with the EU ATEX type examination certificate.
Records changes and updates made to the manual across different revisions.
How to identify the specific revision level of the OPTBJ option board.
Configuration settings for jumpers on the OPTBJ option board.
Location and function of the STO jumper on the VACON 100 AC drive.
Details on cutting a jumper to isolate control ground from protective earth.
Explanation of the Safe Torque Off (STO) safety function and its principle.
Explanation of the Safe Stop 1 (SS1) safety function and its principle.
Technical specifications, response times, voltage levels, and data for safety functions.
Guidelines for wiring safety actuators and cables for STO/SS1 functions.
Illustrative connection diagrams for STO and SS1 safety functions.
How to configure STO fault actions and parameters within the drive software.
A checklist to verify all steps before and during commissioning of the OPTBJ board.
Procedures for testing the proper operation of STO and SS1 safety functions.
Troubleshooting guide for faults related to STO and SS1 safety functions.
Technical specifications, functional description, and ATEX function details.
To Next Page
