Need help?Do you have a question about the Vacon OPTA2 and is the answer not in the manual?
General| Supply voltage | 24 VDC |
|---|---|
| Digital outputs | 4 |
| Analog inputs | 2 |
| Protection class | IP20 |
| Storage temperature range | -40°C to +70°C |
| Product type | Controller |
| Communication | RS-485 |
| Programming language | IEC 61131-3 (LD, FBD, IL, ST, SFC) |
| Relative humidity | 5% to 95% (non-condensing) |
Classifies VACON option boards into types A, B, C, and D.
Provides technical specifications for inputs and outputs on option boards.
Describes selection of voltage or current for analogue inputs.
Details selection of voltage or current for analogue outputs.
Explains use of +24V/EXT+24V output for external power.
Illustrates digital input signal conversion methods.
Guides on connecting functions to I/O based on application.
Details connecting functions via NCDrive programming tool.
Describes parameters for configuring option board inputs/outputs.
Covers basic I/O boards, normally pre-installed, using slots A, B, C.
Covers I/O expander boards for increasing drive I/O capacity.
Covers adapter boards for connecting to VACON communication buses.
To Next Page
