Vacon OPTA2 - Board Information Sticker

2
vacon • 16 Installation of VACON® Option Boards
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
2.2 Board information sticker
Each I/O option board package delivered by the factory includes a sticker (shown below) where
possible modifications made in the AC drive are noted. Please check Option board (1), mark the
board type (2), the slot into which the board is mounted (3) and the mounting date (4) on the sticker.
Finally, attach the sticker on your drive.
Drive modified:
Option board:
NXOPT................
IP54 upgrade/ Collar
in slot:
Date:...................
ABCDE
EMC level modified: H to T / T to H
Date:...................
Date:...................
3
2
4
1
7241.emf