EasyManua.ls Logo

VacuumChambers VP115 User Manual

VacuumChambers VP115
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TRANSLATION OF THE ORIGINAL USER MANUAL
Manufacturer / distributor:
VacuumChambers.eu
drControl Dawid Roszczenko
Jodłowa 3A/34
16-001 Ignatki-Osiedle
Poland
E-mail: shop@vacuumchambers.eu; Telephone: +48535312207
2
All photos used in this manual are illustrative photos. The appearance and quantity of the elements supplied to the
customer and their mutual location may vary depending on the ordered vacuum set.
This user manual is based on current knowledge and experience. The manufacturer reserves the right to change the content
of this manual without informing the consumer.
ENVIRONMENTAL INFORMATION:
Do not dispose of that product as unsorted municipal waste.
Used equipment should be sent to an electro-waste collection point.
Nature friendly company.
SYMBOLS USED IN THE MANUAL:
Danger - A hazard that can cause injury or damage.
Hot surfaces. Risk of burns.
Read the user manual of the device.
Wear eye protection.
Wear protective gloves.
Wear protective clothing.
Question and Answer IconNeed help?

Do you have a question about the VacuumChambers VP115 and is the answer not in the manual?

VacuumChambers VP115 Specifications

General IconGeneral
BrandVacuumChambers
ModelVP115
CategoryVacuum Cleaner
LanguageEnglish

Summary

WARNING! Safety Instructions

Range of Applications

Elements of the Vacuum Set

Properties of the Vacuum Chamber

Before the First Use

Air manifold assembly

How to assemble the air manifold for the vacuum set.

Preparation of the vacuum pump

Steps to prepare the vacuum pump, including oil filling.

Connection of elements of the vacuum set

Connecting the vacuum pump, chamber, and hoses.

Additional Equipment

Fitting muffler

Description and installation of the fitting muffler accessory.

Vacuum feedthrough with pouring hose and mechanical flow controller

Details on the vacuum feedthrough, hose, and flow controller.

Stirrer mechanism

Information about the stirrer mechanism as an additional accessory.

Vacuum trap

Explanation of the vacuum trap's function and use.

Vacuum cold trap

Details on the vacuum cold trap for protecting the pump.

Operating Manual

Notes about Use

Troubleshooting Guide

Maintenance

Tank gasket replacement

Procedure for replacing the gasket on the vacuum chamber tank.

Oil change

Instructions for changing the oil in the rotary oil vacuum pump.

Warranty

Declarations of Conformity

EC declaration on conformity - rotary oil vacuum pumps

Manufacturer's declaration of conformity for rotary oil vacuum pumps.