Total Fuel Consumption submenu
Figure 24 – Total Consumption screen
Figure 25 – Resetting specific values
This screen shows the total fuel consumption per engine/consumer and per fuel type in kilograms.
You can reset the consumption values - per engine/consumer and per fuel type - for example if you like
to use these counters for generating 24 hours fuel consumption values for a noon report.
Ticking Reset All will reset all the total values at once.
Be aware that by pushing the Reset buttons the values will be set to zero and the previous
displayed values will be lost.
If you like to reset certain values and keep other values as they are, you can select specific values by
selecting them. After selecting the values they will become light grey. Accordingly you can reset the light
grey values by pushing the Reset key.
Accumulated Fuel Consumption submenu
Figure 26 – Accumulated Consumption screen
This screen shows the total accumulated fuel consumption per engine or consumer in kilograms.
The values are cumulative and non-resettable. These counters can be used as a back-up of the Total
Fuel Consumption counters.
To Next Page
Loading...